pear assessment grades not syncing

Fix: Pear Assessment Grades Not Syncing to Google Classroom

The grades exist. You can see them in Pear Assessment, finished and correct. But in Google Classroom, the assignment sits there scoreless — or worse, some students’ grades arrived and others’ didn’t, which is the version of this problem that really frays nerves. When pear assessment grades not syncing is your afternoon, the cause is almost always one of a handful of unglamorous things: work that isn’t fully graded yet, a connection between the two platforms that’s gone stale, a class mapping that’s off, or a sync that simply needs to be run again after a change. This guide works through them in the order that fixes the most cases fastest.

Before you start: don’t re-enter grades by hand as a first resort. Manual entry destroys the link between the two systems for that assignment, guarantees the records will diverge later, and takes longer than the actual fix in nearly every case. Diagnose first; type numbers only if everything below fails.

First principle: only finished grades can travel

The most common cause isn’t a broken sync at all. Syncing moves final grades, and a grade isn’t final while parts of the assignment are still ungraded — typically the constructed-response questions waiting on you. If an assignment contains even a few responses you haven’t scored, the grades can’t complete their journey to Classroom for the affected students, and depending on the state of the assignment, the whole push may appear stalled.

So the true first step is boring: open the assignment in Pear Assessment and confirm every student you expect grades for is fully graded — no pending responses, no partially scored items, no one sitting in an in-progress state. Then check your release state: if your workflow holds scores unreleased while grading continues, finish the workflow first. Teachers regularly discover at this step that the “sync problem” was one unscored essay short of done. Our guide to release scores vs mark as done in Pear Assessment explains the finishing sequence that leaves grades in a state where syncing makes sense.

Pear Assessment grades not syncing - comparing the gradebook with Google Classroom side by side

Check the connection between the platforms

If everything is graded and released and Classroom is still empty, suspect the link between the two accounts. The Pear Assessment–Google Classroom connection is an authorization you granted once, and authorizations quietly expire, get revoked by password changes or district policy updates, or break when either side updates its permissions. The classic symptom: syncing used to work, nothing obvious changed, and now it doesn’t.

The reliable fix is the reconnect:

  1. Go to the integration or sync settings where Pear Assessment manages its Google connection.
  2. Disconnect the existing Classroom connection.
  3. Reconnect it, signing in with the correct Google account — the one that owns the Classroom classes, which in schools with multiple accounts (personal, school, department) is an easy mistake to make.
  4. Confirm the class you need appears in the class list after reconnecting.
  5. Run the sync or grade push again for the assignment.

This disconnect-reconnect-and-repush sequence is the known cure for the majority of stubborn sync failures: it discards the stale authorization, issues a fresh one, and lets the pending grades flow. If the assignment was set up before the reconnect, re-running the push after reconnecting is the step people forget — the fix doesn’t retroactively deliver grades until you ask it to.

Verify the class mapping and the assignment’s origin

Syncing depends on the two platforms agreeing about which class is which. Problems hide here when:

  • The Pear Assessment class was created manually rather than imported or synced from Classroom, so no mapping exists for grades to travel back along.
  • A Classroom course was synced to several Pear Assessment classes — or the reverse — and the grades belong to a different mapped class than the one you’re checking. (Multi-class mapping is a legitimately confusing corner; the general guide to Pear Assessment for Google Classroom explains how the class relationships work.)
  • The assignment in Classroom was created directly in Classroom rather than posted from Pear Assessment, so it isn’t the linked assignment the sync expects.

If the mapping is wrong, the practical remedy is usually to post or link the assignment through the integration properly and sync from there — not to force grades into an unrelated Classroom assignment by hand.

Pear Assessment grades not syncing - checking the connection between the two platforms first

Changes after the first sync need a second push

A subtler version of the problem: grades synced fine last week, you then changed some scores in Pear Assessment — corrected a key, finished a make-up, adjusted a response — and Classroom still shows the old numbers. Syncing is not a live mirror; it’s a transfer that happens when it runs. Score changes made after the transfer need the sync run again to propagate. This pairs with the regrade workflow: whenever you correct grades post-release (see our guide on changing a grade in Pear Assessment), finish by re-pushing grades to Classroom and spot-checking two or three students on both sides to confirm both records match.

When the student isn’t properly in both systems

Sometimes the sync machinery is fine and the problem is a person-shaped mismatch. Grades travel per student, matched between the two platforms’ rosters. A student who appears in your Pear Assessment class but was never enrolled in the corresponding Google Classroom course has nowhere for a grade to land; a student enrolled under a mismatched name or account — common after schedule changes, name updates, or a mid-year transfer — can end up as two half-identities, present in one system and ghostly in the other.

Symptoms that point here: exactly one or two students perpetually missing grades while everyone else syncs cleanly, every time, no matter how often you re-push. The fix is roster hygiene rather than sync settings: confirm the student is enrolled in the Classroom course with the same school account they use for Pear Assessment, confirm they’re on the Pear class roster (not a duplicate entry), and then re-run the sync. Mid-year arrivals deserve a special glance — students added to one system manually during the chaos of a transfer are the classic mismatches, because the automatic roster sync that keeps everyone else aligned never got a clean grip on them.

Pear Assessment grades not syncing - verifying the class mapping and the assignment origin

When it’s bigger than you: district-level causes

Once in a while, nothing in your control is wrong. Districts manage Google domains and integration permissions centrally, and a policy change, an admin-console update, or an expired district-level authorization can break syncing for every teacher at once. The tell is social rather than technical: colleagues are reporting the same failure on the same day, in classes that synced fine last week.

In that situation, your job is a good report, not heroics. Note when it last worked, what you’ve already tried from the checklist above, and whether the failure affects all students or some — then hand it to your instructional tech team with that summary. You’ll save them the first round of questions, and you’ll get a working sync back faster than the teacher who just writes “grades broken.” Meanwhile, your grades themselves remain safe and visible in Pear Assessment; the failure is in the delivery, not the data, and no re-grading will be needed when the connection is restored.

The systematic checklist

Run it top to bottom; most cases die in the first three steps:

  1. Every student on the assignment fully graded — nothing pending or partially scored.
  2. Grading workflow completed and scores in their final, released state.
  3. The Pear Assessment class is the one actually mapped to the Classroom course you’re checking.
  4. The assignment is the linked/posted one, not a lookalike created separately in Classroom.
  5. Disconnect and reconnect the Google integration with the correct account.
  6. Re-run the sync/push after any reconnect or score change.
  7. Spot-check three students in both systems.
  8. Still stuck? Note exactly which students are missing grades — “all” versus “some” versus “one class only” points your tech team to very different causes, and the Pear Assessment troubleshooting guide helps separate platform faults from setup faults before you escalate.
Pear Assessment grades not syncing - working through the systematic troubleshooting checklist

Frequently asked questions

Only some students’ grades are missing in Classroom. Why?
That pattern usually means those specific students weren’t fully graded when the sync ran (one unscored response each is enough), or they submitted late and were graded after the push. Grade them fully, then re-run the sync.

Do I have to disconnect and reconnect every time?
No — only when the connection itself is stale or broken. If syncing generally works and one push is missing, re-running the push after completing grading is sufficient.

Will reconnecting delete my grades?
No. Disconnecting the integration doesn’t touch grades stored in Pear Assessment; it just removes the authorization link, which you then recreate.

How can I stop this happening every term?
Build the finish line into your routine: grade everything, complete the release step, then sync — in that order, every time, rather than syncing opportunistically mid-grading. Most repeat sync failures are workflow order, not technology: a push attempted while responses were still unscored, or score edits made after the push with no second push to carry them. If you also spot-check three students in Classroom after each sync — the same three names becoming your standing sample — you’ll catch drift on the day it happens instead of at report-card time, when it becomes an excavation project instead of a re-push.

The grades show in Classroom but with wrong values.
They’re probably older values from an earlier sync. Make your corrections in Pear Assessment, then sync again to overwrite with the current numbers, and verify.

Where’s the official documentation?
The official Pear Assessment documentation covers the current integration steps for Google Classroom.

The bottom line

When Pear Assessment grades won’t sync to Google Classroom, work the boring causes first: unfinished grading, then the stale connection (disconnect, reconnect, re-push), then class mapping, then the forgotten second sync after score changes. Nine times out of ten the culprit is one of those four — and the fix takes five minutes once you know which one you’re looking at, which is why the order of this checklist matters more than any single step in it. The deeper comfort is that nothing in this failure mode endangers your actual grades: they live complete and correct in Pear Assessment throughout, and every fix in this guide is about restoring the delivery route, not rebuilding the data. Diagnose calmly, in order, and resist the spreadsheet — the sync almost always comes back, usually within minutes of the right step, and your future self will thank you for a linked record that still agrees with itself at the end of the term instead of a hand-typed duplicate slowly drifting away from the truth — and the next sync, next term, will start from a linked record you can actually trust and verify.

Leave a Comment

Your email address will not be published. Required fields are marked *


Math Captcha
3 × 1 =


Scroll to Top