You’ve done everything right — built the quiz, assigned it, and announced it to the class with confidence. Then the hands go up: “I don’t see it.” Teachers end up searching the problem in the students’ own words — students can’t see assignment in pear assessment — usually while the class waits. When students can’t see the assignment in pear assessment that you just gave them, the cause is almost never mysterious, and it’s almost never the student’s fault. Two culprits account for the overwhelming majority of cases: the assignment never actually left your drafts, or its open date is set in the future. Behind those come a short bench of supporting causes — wrong class, wrong account, roster lag — and this guide works through all of them in the order that gets your class started fastest.
Use it as a live troubleshooting script. The first check takes ten seconds and resolves most incidents before the second hand goes up.
Culprit #1: The assignment is still an unpublished draft
Building a test and assigning a test are two different acts, and the gap between them is where this problem lives. If you created the assessment, clicked through the assignment screens, but never completed the final assign/publish step — interrupted by the bell, a colleague at the door, the universal laws of teaching — the assessment exists in your library as a draft while your students see absolutely nothing. From their side, there is no assignment; from your side, it looks finished, because the test itself is sitting right there in your account, complete and correct.
The check: open your assignments or class view and look at the assignment’s status rather than the test’s existence. If it shows as a draft or isn’t listed as assigned to the class, complete the assignment step now — choose the class, confirm dates, and assign. Then have one student refresh and confirm it appears before announcing to the room. Relief will be immediate and total, because this cause produces a clean, universal “nobody sees it” pattern: if literally zero students can see the assignment, draft status (or the next culprit) is a near-certainty.

Culprit #2: The open date is in the future
The second classic is a scheduling slip. Assignments carry an open (start) date and time as well as a due date, and students can’t see an assignment before it opens — by design. A mis-set open date hides the assignment completely: an AM/PM slip, the wrong day on the calendar picker, or a start date inherited from a copied assignment you originally built for next week.
The check: open the assignment’s settings and read the open date and time slowly, out loud, digit by digit. Teachers’ eyes glide over dates they’ve set themselves; reading aloud defeats the glide. If the open moment hasn’t arrived, either move it to now (if you want the class starting immediately) or tell the class exactly when it will appear and what to do meanwhile. While you’re in settings, glance at the due date too — a due date mistakenly set before the open date creates a second, weirder failure that will bite you at submission time.
Culprit #3: It’s assigned to a different class
If some students see the assignment and others don’t, the shape of the problem changes: visibility is fine, targeting is wrong. The usual story is a teacher with several sections — period 2 sees it, period 4 doesn’t — because the assignment went to one class and not the other, or to last semester’s section that shares a similar name. Check the assignment’s assigned classes and add the missing one. Students who transferred sections recently are a special case: they may be looking at their old class’s list, or sitting in your roster but checking from an account enrolled in the other section. This is also where checking the class list inside the assignment beats trusting memory: with six sections, “I’m sure I assigned it to all of them” is a hypothesis, not a fact.

Culprit #4: The student is looking from the wrong place or account
When exactly one or two students can’t see an assignment everyone else has open, stop inspecting the assignment and inspect the student’s view. Common findings: they’re logged in with a personal account instead of their school account (or a sibling’s account on a shared home device); they’re inside the wrong class in the platform; their app or browser tab is showing a stale, cached view from before the assignment posted; or they were never actually enrolled in your class roster — a mid-year arrival added to the seating chart but not the class list. Our walkthrough of the Pear Assessment student login shows exactly what students should see when things are working, which makes spotting the deviation easier.
The sixty-second script for one-student cases: confirm the account shown on their screen is their school account, confirm the class name matches yours, refresh or re-login once, then check your roster for their name. That sequence resolves nearly every single-student case; the remainder are genuine account problems for your tech team, usually involving roster syncing — which connects to the manual fix described in our guide to teacher-managed rostering in Pear Assessment for teachers who maintain class lists by hand.
Culprit #5: You edited or re-assigned, and the class is looking at the old one
A rarer wrinkle: you assigned the test, realized something was wrong, unassigned or replaced it — but half the class still has the original version open or bookmarked. Students with the test player already open can be working in a session that no longer matches the current assignment list. The remedy is a clean reset: close out the old attempt path, direct everyone to the class assignment list afresh, and have students enter from there so the whole room is provably on the same assignment. This is also why mid-flight test surgery (fixing a flawed question, swapping versions) deserves the careful clone-based handling in our guide to editing a test in Pear Assessment — version confusion is a visibility problem waiting to happen.

The five-minute diagnostic order
When hands go up, resist random clicking and run this order — it’s sorted by probability and by speed:
- Count the hands. Nobody sees it → assignment-level cause (draft status or open date). Some see it → targeting cause (class or roster). One student → student-side cause (account or view).
- Check the assignment’s status — assigned and published, not draft.
- Read the open date and time aloud.
- Check the assigned class list against the section in front of you.
- Only then go student by student with the account-and-roster script above.
For stubborn cases beyond this list, the official Pear Assessment documentation describes current assignment settings, and our broader troubleshooting guide covers platform-side faults.
Preventing the invisible assignment: a sixty-second pre-flight check
Troubleshooting is good; never needing it is better. The invisible-assignment problem almost always traces back to a skipped ten seconds at assignment time, so build a pre-flight ritual and run it every single time before you announce a test to the room:
Watch the assignment complete. Don’t build the assignment in one tab and announce from memory in another. Finish the flow on screen, and let your eyes confirm the final assigned state — class name, status, dates — on the confirmation you end up on. If you were interrupted mid-flow, assume it didn’t finish; the draft culprit claims more teachers than any software bug ever has.
Read the dates like a proofreader. Open date, open time (AM or PM — say it in your head), due date. Three values, five seconds, spoken silently digit by digit. This single habit prevents both of the top two culprits in this article, since future-open-date failures are nearly always one misread field.
Check the class list against the roster in the room. Especially if you teach multiple sections with similar names, or if the assignment was copied from a previous one. Copied assignments carry copied targeting: the copy remembers last month’s classes, not today’s.
Verify from a student’s seat. The gold-standard check: open the class assignment list the way a student would — a student device, a demo account, or simply asking the reliable student in the front row, “Tell me when you see it.” Sixty seconds of verification in the calm before class beats five minutes of troubleshooting with thirty students watching the clock. Teachers who adopt this ritual report the invisible-assignment problem simply stops occurring, because every cause in this article is visible at pre-flight and nearly invisible mid-lesson.

Frequently asked questions
The assignment shows in my list but not for any student. What’s most likely?
Draft status or a future open date — in that order. Students can only see assignments that are fully assigned and whose open time has arrived.
Can students see an assignment before its open date if they have the link?
No. Visibility follows the schedule; a link doesn’t override the open date. That’s the feature working as intended — the date is likely your actual problem.
I fixed the problem. Do students need to do anything?
Usually just refresh or re-open their assignment list. If a student still has an old view after your fix, a fresh login clears it.
Why did this happen right after I copied last week’s assignment?
Copied assignments inherit dates. If last week’s copy carried a future or past schedule relative to today, the copy inherits the confusion until you reset its dates — always re-check dates on a copied assignment before announcing it.
One student joined my class mid-year and sees nothing at all — not even old assignments. Why?
That pattern points at enrollment rather than assignment settings: the student likely isn’t on the class roster in the platform, or their account was created outside the class sync. Add them to the class roster properly (or ask your tech team to check the sync), and every assignment for that class — past and present — will appear at once, because visibility follows class membership.
The bottom line
When students can’t see your assignment, think like the platform: visibility requires an assignment that is published, open, and aimed at the class the student is actually in, viewed from the account they’re actually enrolled with. Check those four gates in order — draft, date, class, account — and you’ll have the room working again in minutes, usually before your coffee cools. And the next time you assign, run the sixty-second pre-flight before you announce: the teachers who verify from a student’s seat simply stop having this problem, not because the platform changed, but because every cause on this list announces itself quietly in advance to anyone who takes one minute to look at the assignment the way a student will see it.

