edit a test in pear assessment

Editing & Cloning Tests in Pear Assessment (Edulastic)

You’ve spotted it at the worst possible moment: a typo in question 7, a wrong answer key, a question your students haven’t actually been taught yet. Your first instinct is to open the test and fix it on the spot. Whether you can edit a test in pear assessment — the platform formerly called Edulastic — depends entirely on one thing: whether the test has already been assigned. This guide explains the rules, the clone-to-edit workflow that gets you unstuck, and how answer keys behave when you change them mid-stream.

The short version: an unassigned test in your library is yours to edit freely. A test that students are actively taking is deliberately locked down, because changing questions under students who’ve already answered them would corrupt everyone’s results. The platform’s answer to a locked test is cloning — and once you understand what a clone carries over and what it leaves behind, the workflow becomes fast and safe.

can you edit a test on edulastic

Yes, with a timing caveat. Tests sitting in your library that haven’t been assigned can be opened and edited like any document: change wording, swap items, adjust points, fix keys, reorganize sections. The moment a test is assigned to a class, though, in-place editing of its questions is restricted. That’s not the platform being difficult — it’s protecting the integrity of responses already submitted. If question 4 changed after twenty students answered the original question 4, their scores would be meaningless.

So the real question isn’t “can I edit it” but “which state is my test in?” Find the test, check whether it has active assignments, and you’ll know which path you’re on:

  • Not assigned yet: edit away, directly in the builder.
  • Assigned but nobody has started: you have more flexibility — many teachers simply unassign or adjust before students begin, then edit.
  • Assigned and in progress or submitted: clone the test, edit the clone, and assign the corrected version going forward. Existing responses stay attached to the original.

If you’re still getting oriented in the builder itself, our guide on how to use Pear Assessment covers the basic layout before you start changing things.

Edit a test in Pear Assessment - the clone-to-edit workflow keeps the original test untouched

The clone-to-edit workflow, step by step

When a live test needs surgery, cloning is the standard move. Here’s the clean sequence:

  1. Open the original test from your library and choose the clone (duplicate) option. The copy lands in your library — rename it immediately with a clear version note so future you knows which is which.
  2. Make your edits in the clone. Fix the typo, replace the unfair question, correct the key, adjust the points. Preview the changed items as a student to confirm they behave.
  3. Decide what happens to the original assignment. If students haven’t started, you can pull the original and assign the clone instead. If some students already finished the original, leave their version alone — you’ll handle their scores separately rather than invalidating finished work.
  4. Assign the clone to the remaining students or classes with the correct dates and settings. Double-check the assignment settings on the clone; don’t assume every toggle copied the way you expect.
  5. Reconcile at grading time. If two versions of the test ran, your reports will live in two places. That’s manageable for one incident — and a strong argument for proofreading tests before assigning them, which is a sermon every teacher preaches and occasionally needs to hear.

what happens when i clone a test in edulastic

Cloning copies the test itself: the questions, their order and sections, point values, standards tags, answer keys, and rubrics. What it does not copy is the life the original test has lived. A clone starts fresh — no student responses, no assignment history, no scores. It’s a new, unpublished twin of the original, waiting in your library.

A few consequences worth knowing:

  • Classes and dates don’t transfer as activity. You’ll assign the clone yourself wherever it’s needed; nothing auto-sends to your classes.
  • Settings deserve a review. Most test-level content carries over faithfully, but assignment-level choices (release timing, accommodations assigned to specific students, due dates) are yours to set again on the new assignment. Treat the clone’s first assignment as a fresh setup and verify each setting.
  • The original stays untouched. Cloning never modifies the source test or its data. If your edit experiment goes sideways, the original is still there, which makes cloning a zero-risk way to try a revision.
  • Your library can fill with twins. “Unit 3 Test,” “Unit 3 Test (fixed),” “Unit 3 Test (fixed FINAL)” — name clones with dates or version numbers and delete failed drafts, or September-you will play archaeology. Teachers building a brand-new exam rather than rescuing one should follow the full blueprint process in our summative assessment guide.
Edit a test in Pear Assessment - revising a question inside the cloned copy of a test

can edulastic answer keys be edited after an assessment is created

Yes — answer keys are one of the most commonly edited parts of a test, because key errors are the most common test error, full stop. If a test hasn’t been assigned, edit the key in place like anything else. If it has been assigned, the same clone logic applies for changing the test itself, but there’s an important second scenario: you discover the key is wrong after students have been graded against it.

In that case, what matters is regrading. When a key is corrected, scores computed from the old key need to be recalculated so students are graded against the right answers — otherwise you’ve fixed the test but left the wrong grades standing. The practical routine:

  1. Confirm the correct answer beyond doubt (check your curriculum materials, not your memory at 11 p.m.).
  2. Correct the key through the editing path available for your test’s state.
  3. Trigger or verify the regrade so submitted responses are rescored.
  4. Spot-check two or three individual students’ results to confirm the new scores landed.
  5. If scores were already released to students, tell them what changed. A one-line note — “Question 7’s key was corrected; scores are updated” — prevents a week of confused emails.

While you’re in there, glance at the Pear Assessment question types whose keys are easiest to mis-set — “select all that apply” and ordering items top the list — and give those extra scrutiny on your next build.

Which edits are safe mid-assignment — and which aren’t

Teachers often ask for a bright line, so here is the practical one most experienced users follow. Safe while a test is live: anything that affects your view and workflow rather than the test students see — organizing your library, renaming your own copies, preparing a corrected clone, grading submitted work, and adjusting scores for individual students where the platform allows it. Not safe mid-flight: changing the wording, answers, or point values of questions students are actively answering, swapping items in or out, or altering time and navigation settings expecting them to apply retroactively to students already inside the test.

The gray zone is instructions and settings at the assignment level — due dates, for instance, commonly can be extended while an assignment is live, and extending a deadline is a normal, harmless mid-flight change. When you’re unsure whether a change touches content or merely logistics, ask: “If this applies right now, does it change what any student’s answers mean?” If yes, it’s a content change — clone first. If it only changes when or how work is submitted or viewed, it’s usually safe.

One more scenario deserves a mention: the shared departmental test with a live error. You may not own the original at all. Your move is the same — clone it, fix your copy, assign the fix to your classes — plus a message to the test’s owner and your department so the master copy gets corrected for everyone. Resist editing an original you co-own while colleagues’ classes are mid-test; your fix could land in the middle of their exam period, and the regrade conversation multiplies by every section using it.

Edit a test in Pear Assessment - comparing the original test with its clone before assigning it

Editing etiquette: small rules that prevent big messes

A few working habits keep test editing painless across a school year. Never edit a test “just to check something” during an active testing window; open a clone or a preview instead. Keep one master copy of each major test in a shared or clearly named library location, and let clones be the disposable working copies. When a colleague shares a test with you, clone it before customizing — your edits then can’t surprise the original owner. And when you find an error in a shared department test, tell the department: if you spotted it, someone else’s class is about to meet it too.

For the authoritative, always-current details on test editing and library management, the official Pear Assessment documentation is the reference to trust over any third-party summary — including this one.

Frequently asked questions

Why can’t I change a question on a test my students are taking?
Because responses are already attached to that question. Editing it in place would silently change what finished students were graded on. Clone, edit, and reassign instead.

Does cloning a test copy my students’ scores?
No. A clone copies the test content only. Scores and responses stay with the original test’s assignments.

I fixed a wrong key. Why are the grades still wrong?
The scores need to be recalculated against the corrected key. Make sure the regrade happens, then spot-check individual students.

Can I edit a test a colleague shared with me?
You can work with your own copy — clone it first so your changes don’t affect their original.

I cloned a test but the clone looks different from the original. What happened?
Usually it’s settings, not content: assignment-level choices like release timing or student-specific accommodations live on the assignment, not the test, so they don’t travel with the clone. Re-check the clone’s assignment settings before students start, and preview the items themselves to confirm the questions copied as expected.

Is there a way to undo an edit?
Treat edits to a library test as permanent — there’s no general undo history to roll back to. That’s the practical reason experienced teachers clone before experimenting: the untouched original is your undo button.

Edit a test in Pear Assessment - making small careful edits that will not break a live assignment

The bottom line

Editing tests in Pear Assessment follows one simple logic: unassigned tests are fully editable, assigned tests are protected, and cloning is the bridge between the two. Master the clone-to-edit workflow, respect what clones do and don’t carry, and treat answer-key fixes as incomplete until the regrade lands — and a mid-test typo becomes a five-minute fix instead of a grading-week disaster. The teachers who never panic about test errors aren’t the ones who never make them; they’re the ones whose habits — preview before assigning, clone before changing, verify after regrading — turn every error into a routine, recoverable event.

Leave a Comment

Your email address will not be published. Required fields are marked *


Math Captcha
35 − = 32


Scroll to Top